 | mobile - desktop |
|
| mobile - desktop |
|
 |
 3 months for $50.00 |
News & Events:
|
Posted by Brandon Osborne on April 16, 2003 at 01:54:12:
In Reply to: homemade incubators posted by electricbluescat on April 16, 2003 at 00:42:27:
John,
personally I wouldn't recommend using a rheostat for incubating eggs. Depending on where you live and the climate, you may not need an incubator. I have never used an incubator for colubrid eggs. A high shelf in a warm room, the top of the refrigerator, or any place that will stay from 75-85* will work fine. I have seen eggs incubate at temps of 90* in the same incubator as burm eggs, but it's a little too high for my standards. As far as the amount of air flow.....you want fresh air, but not so much that the eggs dry out. A couple of small holes in each side of the shoe box will be fine. There are many method that will work great. Good luck.
Brandon Osborne
:I have an idea for making an homemade inucbator but I need some advice right now I have no snakes but will be getting later in august. First take like a rubber maid shoe box mix the vermiculite, water, and moss Place eggs in there the way they were laid. Then heres the question part, could you use a reheostat heat pad underneath this, also use an infrared thermo gun? does this sound like a good idea? put the lid on the shoe box. how much air do eggs need? I know they need humidiy.
:thanks,
:john
