Where do I place the probe/thermometer in a boaphile rack??

Posted by susanpearl on April 28, 2003 at 22:14:41:

Hi,

I plugged in my boaphile "sideways" rack system into a thermostat. I placed the probe on the back wall of the middle tub. I set the thermostat to 90...it never hit 90 degrees. I than decided to disconnect the thermostat and plugged the boaphile rack directly into the wall. I placed a digital thermometer on the back wall of the middle tub. I slide the tub all the way into the rack...the temp never got above 81 degrees.

I'm I placing the probe or thermometer on the wrong area? I would greatly appreciate your help...

Thanks,

Susan P

Follow Ups:

• Your problem isn't the probe markg 04/29/03 (2)
  • Your problem isn't the probe jasons-jungle 04/29/03 (0)
  • One other note markg 04/29/03 (0)

---

[ Follow Ups ] [ The Caging Forum ]

kingsnake.com | NRAAC.ORG | ReptileBusinessGuide.com | ReptileShowGuide.com | ReptileShows.mobi | Connected By Cars | DesertRunner.org AprilFirstBioEngineering | GunHobbyist.com | GunShowGuide.com | GunShows.mobi | GunBusinessGuide.com | club kingsnake | live stage magazine pool banner - advertise here $50 year pool banner - $30 year pool banner - $25 year kingsnake.com® is a registered trademark© 1997-     - this site optimized for 1024x768 resolution -