mobile - desktop |
3 months for $50.00 |
News & Events:
|
Posted by Brandon Osborne on February 22, 2003 at 15:13:58:
In Reply to: Re: found this posted by ToddM on February 22, 2003 at 13:46:58:
:After posting I thought of heat panels (I'm braindead sometimes)and tried finding the helix heat panels. I couldn't find those but I did find this ( http://www.bigappleherp.com/bigappleherp.filereader?3e57d14610330e7c271d424d361a0624+EN/products/118100 ) but I'm hesitant to go with this because I don't know if it'll work with GTPs..
:I also found Enerjoy heat panels, but again I'm not sure it'd work with GTs. ( http://www.herpsupplies.com/cgi-bin/perlshop/perlshop.cgi?action=thispage&thispage=Group2025.html&ORDER_ID=320313237 )
:I think the enerjoy panels would be better, but would like feedback from the rest of you if possible.
:It'll be sometime before I actually get a green tree so I have time to get all this figured out.
:Todd
:
:
:
Todd,
any of the heat panels you mentioned should work fine. As for the cage though, having the vent in the top isn't all that good. Chondros don't need extremely high humidity, but more than most herps. Your humidity should average around 70-80% relative. I doubt that cage would hold those numbers with a large screen in the top. Other than that, the cage will probably be a perfect size for any adult chondro. I would go a little longer on the length, but it will work. Good luck.
Brandon Osborne
P.S. don't plan on one chondro. You will want more. lol.
AprilFirstBioEngineering | GunHobbyist.com | GunShowGuide.com | GunShows.mobi | GunBusinessGuide.com | club kingsnake | live stage magazine
|