It's 1/4" wire mesh . .>

Posted by Terry Parks on February 05, 2002 at 14:59:03:

In Reply to: Re: Spilotes cage.. pic posted by Brian Baker on February 05, 2002 at 14:28:50:

in the front and on both sides. It's hard to see the wire mesh. Del and I used the wire mesh because Tiger rat snakes generally need alot of vertical open air space and Dan Felice recommended it. There's peg board on the top and back with 1/2" plywood on the bottom. I'll try and find a better pic. There's two swing open doors in the front. I can open either side depending on which side Senior spilotes is on.

Follow Ups:

Post a Followup

Name:
E-Mail:

Subject:

Comments:
: in the front and on both sides. It's hard to see the wire mesh. Del and I used the wire mesh because Tiger rat snakes generally need alot of vertical open air space and Dan Felice recommended it. There's peg board on the top and back with 1/2" plywood on the bottom. I'll try and find a better pic. There's two swing open doors in the front. I can open either side depending on which side Senior spilotes is on.

Optional Link URL:
Link Title:
Optional Image URL:

---

[ Follow Ups ] [ Post Followup ] [ The Rat Snake Forum ]

kingsnake.com | NRAAC.ORG | ReptileBusinessGuide.com | ReptileShowGuide.com | ReptileShows.mobi | Connected By Cars | DesertRunner.org AprilFirstBioEngineering | GunHobbyist.com | GunShowGuide.com | GunShows.mobi | GunBusinessGuide.com | club kingsnake | live stage magazine pool banner - advertise here advertise here advertise here kingsnake.com® is a registered trademark© 1997-     - this site optimized for 1024x768 resolution -